NEW:
Surface High Speed Toolpaths
Mastercam X4

“Why read the book when you can see the movie”

Fixture & Part Design For V8 & V9
Includes A Library Of Components.

Be more productive with your Mastercam system by getting the work on your machine faster. These lessons will show you how to create fixtures in a snap. You will receive a library of clamps, screws, pins and vises. You will also receive 1-1/2 hours of video instruction on how to use them in real world, practical examples. You'll even pick up some tips on Solid Modeling.

This library contains over 80 different component types drawn as Mastercam Solid Models and also as 3D Surfaces. You can import these components into your drawing Even If You Dont Have Solids On Your System.

Place your part in a vise in minutes, for better visualization or for set up instructions.

See how quickly you can build a fixture on a horizontal tombstone.

This CD contains web based tutorials and libraries for V8, video lessons and libraries for V9. The videos for V9 will still be useful to anyone using V8. These features will only work with Mastercam V8.1 and above ( not V8.0). Some of the lessons do require solds, but when you see what you can do, you may want to get it. Most of the lessons do not require solids.

Requirements: Your system should have 8x speed or better CD rom, 1024 x 768 video resolution, sound card & speakers. You do not need to have Mastercam on your system to view the videos. You will need it to use the included component libraries and sample drawing files. You can also use this with a Mastercam Demo Disk.

Personal, Professional Training
Anytime You Want It For
Only $75.00